22.2" x 12" Wall & Floor Concrete Mat If you want your floor or wall to look more aesthetically pleasing then this concrete stamping mold would be the ideal choice, it is made from a sturdy PU that is impact for a long life. Its clear stone pattern adds a creative pattern to the concrete surface and adds a non-slip effect. Key Features Create a Beautiful Texture Our concrete textured skin can create beautiful and natural textures on your concrete surface. It can help you decorate your yard, driveway, or swimming pool deck, making it look as beautiful as a painting. Clear Slate Stone Texture This dreamy texture skin design has clear textures throughout the entire surface. Therefore, it can create continuous and clear detailed textures, making the internal beauty of concrete vivid. 22.2" ×12" High-quality Polyurethane The 22.2" ×12" concrete stamping pad is made of thick polyurethane and has excellent tensile strength, elongation, and physical resistance. It is a durable and flexible for long-term concrete imprint. Two Handles Attached Concrete molds can be used on vertical or horizontal surfaces. There are two convenient handles on the back for easy carrying and lifting. It also includes an additional touch up of the skin to compensate for the texture. Easy to Operate Firstly, apply the coloring powder to the surface of the finish. Next, smooth the surface and apply release powder on it. Finally, stamp the mold and reinforce the stamped pattern with protective agent. Extensive Use Given its high quality, our concrete stamping tools have been widely used for decorating squares, garden paths, hotel lobbies, courtyards, sidewalks, roads, parking lots, garages, and more. Construction Process of Embossed Floor 1. The formwork paving, vibrating, grouting, and leveling shall be completed according to the construction procedures of pavement concrete. 2. Before the initial setting of the concrete surface, use a large magnesium alloy spatula to smooth the concrete surface. 3. Use special magnesium alloy edge finishing plaster to finish edges and corners as required. 4. Spread the colored reinforcement evenly on the concrete surface two times, the first time spreading 2/3 of the standard amount (6.6 lbs per square meter), and the second time spreading the remaining 1/3. 5. Every time the color reinforcement is sprayed, the magnesium alloy trowel shall be used for leveling and polishing after the color reinforcement is wet so that the color reinforcement can completely cover the concrete surface. 6. After the initial setting of the color strengthening material, when the surface is dry, evenly sprinkle the coating powder on the surface, and the standard dosage per square meter is 0.33 lbs. 7. Press the die alternately and progressively. The die shall be formed once to avoid repeated stamping. 8. Brush the floor surface evenly three days after the completion of the die. A small amount of detergent can be added during cleaning. Cut the expansion joint in time before cleaning. 9. After the floor surface is completely dry, it must be sprayed with color art floor protective agent, the standard dosage is 0.33lbs per square meter. The protective agent can spray with a roller brush or spray barrel. Construction Process of Embossed Floor 1. The formwork paving, vibrating, grouting, and leveling shall be completed according to the construction procedures of pavement concrete. 2. Before the initial setting of the concrete surface, use a large magnesium alloy spatula to smooth the concrete surface. 3. Use special magnesium alloy edge finishing plaster to finish edges and corners as required. 4. Spread the colored reinforcement evenly on the concrete surface two times, the first time spreading 2/3 of the standard amount (6.6 lbs per square meter), and the second time spreading the remaining 1/3. 5. Every time the color reinforcement is sprayed, the magnesium alloy trowel shall be used for leveling and polishing after the color reinforcement is wet so that the color reinforcement can completely cover the concrete surface. 6. After the initial setting of the color strengthening material, when the surface is dry, evenly sprinkle the coating powder on the surface, and the standard dosage per square meter is 0.33 lbs. 7. Press the die alternately and progressively. The die shall be formed once to avoid repeated stamping. 8. Brush the floor surface evenly three days after the completion of the die. A small amount of detergent can be added during cleaning. Cut the expansion joint in time before cleaning. 9. After the floor surface is completely dry, it must be sprayed with color art floor protective agent, the standard dosage is 0.33lbs per square meter. The protective agent can spray with a roller brush or spray barrel. Package Included 1 Piece Concrete Stamping Mold Specifications Material: PU Number of Pieces: 1 Operation Mode: Manual Gross Weight: 3.2kg/7.05lbs Product Size: 56.5X30.5cm/22.2X12inch Notes Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.
